Evo 3 brake.. want to post it brake topic at Tuning and up

C

cmng

New Member
Just to mention

Evo 1-3 Twin pot brake is plug and play for GTIR

you need to use Evo rotor as well
it is 276 x 24 mm size

drill the rotor to PCD 100 x 4
the on the mounting
it plug and play just need to bore a bit bigger the caliper lug on one side only

it very popular conversion at malaysia for Sentra Owner


By the way
Evo 1-3, VR4 RS 2 pot all can use

ALL MITSU Caliper with 2 pot caliper and 276 x 24 mm disc is FIT

sorry
this is disadvantage of non paid member

Some one please copy this to the Tuning and upgrade
and brake upgrade topic

Thank
 
A

ashills

Active Member
these brakes are good on my evo 1 i never upgraded the brakes apart from some new pads i was trying (very good they were aswell) and i had no trouble atall at bruntingthorpe stopping from over 160
 
C

cmng

New Member
err it very easy

you get hold a EVO 1-3 caliper and compare it with RNN14 caliper
then you know it will be DAMN easy
it just about 1mm different only on both of the caliper mounting

overall you can said all
Evo 1-3 brake upgrade will fit RNN14

i not sure on E4 and E5 brembo above
 
A

ashills

Active Member
the evo brembo calipers are very wide so idoubt they would fit but might be worth a try as they will go on teh evo 1-3 with a spacer but is very very tight
 
C

cmng

New Member
i asking my evo friend to check on this
update the status
since i not familiar with Evo related
 
Fire & skill

Fire & skill

Vintage member
Re: Evo 3 brake.. want to post it brake topic at Tuning and

cmng said:
Just to mention

Evo 1-3 Twin pot brake is plug and play for GTIR

you need to use Evo rotor as well
it is 276 x 24 mm size

drill the rotor to PCD 100 x 4
the on the mounting
it plug and play just need to bore a bit bigger the caliper lug on one side only

it very popular conversion at malaysia for Sentra Owner


By the way
Evo 1-3, VR4 RS 2 pot all can use

ALL MITSU Caliper with 2 pot caliper and 276 x 24 mm disc is FIT


Thank
Click to expand...
thanks dude!! this is a great help - i am going to try this conversion on my car :wink:
 
Sweeny

Sweeny

New Member
8) this is good news

evo 1-3 calipers will go up in price when the evo owners catch on :lol: :roll:
 
abyss

abyss

Member
i have found a site that shows a picture of the inside of the caliper apart from being a 2 pot it looks identical to the pulsar caliper.
 
gtir bean

gtir bean

New Member
i have found some calipers so just need to get a price for some disks.if there not bad this will probably be my next mod.
 
C

cmng

New Member
no
it large surface
you can compared it with those other nissan twin pot caliper like
from U13 SR20DET or those Cefiro A33 or A32 twin pot
it same caliper but different mounting

using Mitsu version will fit it directly

a feed back from my friend that
EVO 4 twin pot and rotor also fit Evo 3, just need to redrill the rotor only
Evo 4 is 295 x 24 mm
and Evo 5 and above brembo will fit to Evo 4 plug and play

so if this informantion is correct
it is high chance that Front Evo brembo will fit to RNN14 plug and play
this is what i was told
will verified it asap

will update the status when i manage to get my friend to measure his Evo 7 brembo mount measurement
 
A

ashills

Active Member
trouble is the evo 5 onwards brembos are very wide alot of early evo guys who try to fit them need to run large spacers and they are known for being terrible for warping discs
AP even designed a new typr of disc to try and sort the problem but would be interesteing to see if they would bolt up etc
 
C

cmng

New Member
yup Evo Brembo is know for Warping issue

spacer..
i am sure the caliper clearance is big and need a smaller rim offset or thick spacer if it do fit since looking at the Evo brembo size it is big
 
scottgtirxxx

scottgtirxxx

Member
Hi just wanted to see if anybody had actually done the Evo 4 upgrade ( 2 pot ) as i have just aquired some and very keen to get them fitted.
 
scottgtirxxx

scottgtirxxx

Member
Thanks for the response boys however i have got a set of Evo 4 2 pot calipers not Evo 1,2 or 3 and was wondering if anybody had used these. As above post by cmng he said he thought it may be possible.
 
You must log in or register to reply here.
Top