wheel offset question

Spikey

New Member
Im looking for wheels for my Wide arched Pulsar.
So i need the wheel to come out more so was wondering how much over offset can i go?

i seen some Rota Grid 15" et 20 7" wide. can i go down to et 20? or even et 0?

will be a track car.
 

red reading

Active Member
15" wheels are lost in the wide arch cars, i have 8" x 16" et 32 with 6mm spacers (3mm would have worked on the front and nothing on the rear but it was too tight for comfort) with 215 in standard arches if that helps
 

Braveheart

New Member
IMO, 15" rims with 50 profile are a great choice for trackday car. An et 0 will but more strain on suspension and wheel bearings however.
You have pm regarding R888`s ;-)
 

Spikey

New Member
yes but i been told its fine or even et20 should do. But i have to bring the wheel further out cause of the wide arch Kit.
 

Trip

New Member
If its a track car, first thing you need to consider is how good it is on the track Vs how it looks.

wheel offset will change the scrub radius which will effect how the car behaves on track.
 

Spikey

New Member
im not going just for looks but its got to match the size of the wider arches :)
Well ill see how it handles. i think et20 would not be that far off
 
Top