Spacers

kenan

South West Regional Rep
Looking into whels and brakes and seems most require spacers due to the offset. Would you be able to get away with just running spacers for say 5-10mm or would you need to extend the bolts?
 
P

pulsarboby

Guest
you will just get away with 5mm spacers but 10mm you will need longer studs or youll be seeing your wheel overtake you down the motorway:lol: :lol:
 

kenan

South West Regional Rep
for the longer studs can you remove the ones from the hub or do you need a kit?
 

dobby

New Member
They are easy to change. Once you get the disc off it will be blantently obvious that all you got to do is whack the studs with a hammer and they fall out. to get the new ones in you need to line up the spline and use a nut to draw it in.
 

kenan

South West Regional Rep
dobby said:
Once you get the disc off it will be blantently obvious that all you got to do is whack the studs with a hammer and they fall out.
Well I took the wheels on on Sunday and didn't spot it :doh: lol

Anyone reccomend where the best place to get the spacers with the hubcentric bit would be?
 
Top