Manifold Gasket

[ShayneG]

Does this DP manifold below use the standard nissan gasket where you bolt the turbo on with the 4 bolts?
I've got to remove it as Mr Bodger who had the car before me didn't brace t properly on the engine block which in turn has put pressure on the external waste gate pipe and cracked the weld all round!
I don't get some people, all it needed was a single bolt putting in to brace it correctly!

 

[red reading]

Either be a t25 or t3 flange, you need to measure or remove it to tell.

 

[red reading]

When you get the manifold welded get it stress relieved and then have it ceramic coated, you will need to brace the turbo to th block as well as the w/g bracket bolt otherwise it will crack again.