Head gasket

Rscozzy

Member
Can I get smaller bore gasket like 87mm would this work or does it have to be 88mm I measured old gasket not cylinders
 

The Doc

Moderators
Staff member
Measure the bore...you can get 87,88,91mm and from 1.1 to 2 mm, from hks,cosworth,tomei.
 

Rscozzy

Member
Am looking just for Nissan gtir head gasket will other Nissan sr20det gaskets fit theys loads of different 1s
 

PobodY

Moderators
Staff member
I could be wrong about this, but I believe the technical answer is that they won't fit out of the packet. - The dowel sizes are different so you'd need to enlarge the holes in the gasket to fit the 54C block.

I can't remember if there's anything else like making an opening for oil galleries or the timing chain.
 

The Doc

Moderators
Staff member
Tomei and hks bolt on as is, cosworth needs dowl holes opening up...just contact fusion motorsport and by from him.
 
Top