Clutch Fork?

[Sailor96]

Hello my fellow legends

Driving the other day and it was nearly impossible to get into gear. Clutch pedal suddenly got soft with a slight click towards the end of the pedal range.

Checked the fluid reservoir, it was still full. Checked that the slave cylinder is moving it's full travel length. The fork itself seems to be firmly in place, not tons of play.

I'm thinking the clutch Fork pivot ball either snapped or push through the fork itself, since I've read a few posts of it happening on this forum.

Thoughts or suggestions?

 

[Smo]

As you said, could be the fork itself - this happened to my previous Pulsar;

It's a bastard but there are options out there to make sure it never happens again.

Could also be the clutch pedal box where it attaches to the bulkhead. I've seen failures there with stiffer clutches.