310mm brakes

[noriek2003]

as Braveheart already said, not all 15" rims on the market are alike. I for one have two sets of 15" rims and both do not clear the 310's.

so is that spokes that hit the caliper before the wheel sits properly onto the bell or the does the wheel physically not fit over the caliper ?

if its the spokes/caliper clearence that the problem that isn't actually that difficult to overcome with spacers and longer studs if required.

 

[dencon]

310 brakes

The spokes and raised part of wheel near spokes come into contact with calliper. But what I have just stated is that if a smaller ET is used there is no need for spacers or longer bolts. After todays trial I intend to replace my 40s for a set of 15x7x28 with slick tyres and a wider track.8)

 

[Braveheart]

This may be of interest.... 6 pots that might fit under 15" rims.
http://www.kad-uk.com/media/G_info.pdf

 

[Trip]

Will a ET28 wheel rub the tyre against the wheel arch on compression ??

 

[kenan]

Mine haven't with a 195/50/15 tyre

 

[Trip]

Mine haven't with a 195/50/15 tyre

Hi Kenan. are yours 7" wide too ?

 

[kenan]

no 6.5 I belive