15x7in wheels with Evo I-III calipers???

[velly4]

Hi guys,

I'm after a set of 15x7in wheels but having quite a bit of trouble finding something that will fit over the Evo calipers.
I have tried a set of Enkei RPF1's and they foul on the inside of the wheel.

Does anyone have 15x7 wheels with this setup?

 

[vss irvine]

you shouldnt have that much bother, i had 15x6 wheels on with the clio 280mm discs and evo calipers. offset was et38.

didnt even need to run spacers

 

[velly4]

I am having trouble though. RPF1's don't fit, OZ Ultraleggera won't fit, Team Dynamic 15x7 won't fit.

 

[vss irvine]

what offset are you using though!

 

[velly4]

The Enkei's were +35. Clearence to the inside surface of the is the biggest problem. Spoke clearence hasn't been an issue as yet.
I have no issue with rolling the gaurds if need be so anything from +40 and down.

I'm after wheels that are around 5kg (10-11pounds) per rim.

 

[skiddusmarkus]

That's a 15" wheel(volks te37)with 300mm discs but the caliper is very low a very low profile hispec one.There's about 10mm clearance.I also have some oz supert's but there is only a few mm of clearance with those.The volks are very very light but also very rare and very expensive.

 

[velly4]

Thanks mate, what is the rough distance from the center of your hub to the highest point on the caliper?

Its approx 160mm with the Evo caliper

 

[velly4]

Its measurement D i'm having trouble with