HKS 3037turbo

[davidjepson]

Hi
Im will be having my engine rebuilt very soon. Ive been offered a HKS 3037 turbo. What power bhp and torque would I expect to get at say 1.0, 1.5 bar and 1.8 Bar

DJ

 

[davidjepson]

HKS 3037 Turbo

Im having forged Pistons, ported head, front mount intercooler. piggy back ecu, eletronic boost controller, ACL bearings, external wastegate, Z32 maf, proper job.. Thanks

DJ

 

[red reading]

380 and upwards

 

[davidjepson]

is 380bhp @ 1bar boost? what would 1.5bar give roughly? Thanks

 

[red reading]

415ish

 

[davidjepson]

Any ideas of torque Red Reading? thanks for your help by the way.. DJ

 

[red reading]

340lbft and up

 

[davidjepson]

Hiya
Is 340lbft at 1bar or higher? I know they are only estimates..Thanks again. DJ

 

[red reading]

at 1 bar dave

 

[red reading]

i was making 420lbft at 1.5 bar on my old 3071 (pretty much the same as a hks3037)

 

[davidjepson]

So i could reasonably expect 400lbft at 1.5 bar then with the 3037? That would be nice. DJ

 

[red reading]

and the right cam's &cam timing,comp ratio,exhaust,inlet mods,port job and mapper to set it up

 

[davidjepson]

ok thanks 400bhp and 400lbft is my goal @ 1.5bar... What power would 1.8 bar give me if i decided to go that high? Do you advise 1.8 it or should i keep @ 1.5bar

 

[red reading]

ok thanks 400bhp and 400lbft is my goal @ 1.5bar... What power would 1.8 bar give me if i decided to go that high? Do you advise 1.8 it or should i keep @ 1.5bar

just try the car at 1.5 bar first , it should be fairly reliable, i personally keep upping my boost and have fitted a bigger turbo 8) which is making things interesting:twisted:

 

[davidjepson]

i bet it has ..lol.. 400bhp/400ftlb will be nice and from what you have said its achievable..

 

[tenfoloten]

habib do 420bhp @1bar with 3037s and full build engine