Sorry should have added what the car does have, it's got a front mount an air filter 3"decat and catback walbro 255 In tank feeding a swirl pot to an 044 to the rail it's got an avcr boost controller and an updated clutch and flywheel and an oem lsd transfer box updated brakes on the front and...
Hi Iv got my car run in after my build I'm now looking into getting some power out of it looking for 400hp
What supporting mods are recommended before mapping and on what software?
I'm looking at
A gt3071r .86 housing (need to find one)
3" elbow (bogdan hopefully)
3" downpipe (need to find)...
Well Iv finally got my engine fitted and run in I'm now looking to up the boost on my avcr Iv got all the settings in wiring side sorted and as far as I know piped in correctly and I can't get the boost over 0.6 I have scoured forums google and everyone local to me with no joy it have the apexi...
Well...... Finally got everything working on the electronics side now that it's all working and plumbed in I can't get anything over 0.62bar of boost got all the settings in for running a bar but the boost doesn't increase it's the same as if it's running in the off position really starting to...
well I got it all working and have put the settings in but the rpm on the unit is really high and jumps about when im sitting still between 3000 and 7000 no idea whats going on any one got any ideas?
Thanks
Mickie
Yeah Iv got them soldered in 1-2cm apart still nothing only works if I put a jumper cable over straight to earth and yeah map sensor only reads manifold pressure so it doesn't matter which one it goes to as I say il get stuck into it on Saturday hopefully can sort somthing out
Mickie
Yeah all soldered apart from the purple as I will be changing it after mapping had a bit deeper look into it last night it seems to be an earth problem all wires are fine and I get 12v from the ignition feed and the unit powers up if I directly earth the unit going to wait till it's all up and...
Il get back to you mate lost the rag last night and put it 12v straight to the unit and it powered up so tested the voltage coming from the ecu and it's only 1.21v so clearly got an issue so where il have another look on Saturday and get back to you :/
Mickie
Having a few issues with plumbing my avcr in am I right in thinking the map sensor T pieces into the vac line coming off the FPR and then the apexi solenoid goes in the place of the standard solenoid? And you do away with the standard boost solenoid?
Also after wiring it in and plugging the...
Hey guys, well after my car being plagued with engine troubles it's now finally returning to the road :D if got a few last issues to resolve before Saturday the 29th when it goes in Iv had a search but coming up trumps at the moment so here goes.
1. Boost piping I seem to have an extra vac...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.