Search results

Hot Hatch Car Trackday Sun 30th January - 10am - 4pm Our Hot Hatch Trackday gives you an ideal opportunity to test the full capabilities of your car around the twists and dips of the Knockhill Circuit. Hot Hatch days are for both Road and Track car running in alternative...

Car Trackday 11am - 2pm Sat 8th January - 11am - 2pm CAR TRACKDAY – SATURDAY 8^th JANUARY 11am – 2pm We know all you trackday guys and girls will be itching to get your pride and joy back on track so we have added a Car Trackday on Saturday 8^th...

Thought this could be quite useful..... anybody fitted something like this? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140380611081&ssPageName=STRK:MEWAX:IT

As I am a bit limited with settings on the GAB struts for a track car I think I should replace them with a good set of coilovers. I have looked at a number of kits but can't make a choice. Don't want to spend more than £700. I have a spring rate of 8.0 / 6.5 and would like hight adjustment...

Bought a solid state HDD netbook in Sainsburys of all places the other day hoping that I could use it in the car to data log and map E-manage Ultimate EMU. http://www.mydisgo.info/archives/545 It's running windows 5.0 CE and I can't get it to run the EMU software. Anybody know if there's a way...

Knockhill Trackday with TrackScotland on Saturday 5th Feb 2011. I plan to attend. Open pit lane with fast cars & polite drivers. We are running a track afternoon on Saturday 5th February 2011. It will be run from 12pm to 4pm. * Open Pit lane with passing on the left (on straights)...

I'll be going to this weather permitting. Looks like there's lots going on! Have softened the rear arb and dampers in an attempt to dial out the overstear that I experienced last time out. Anybody else planning on going? HOT HATCH XMAS CRACKER – SUNDAY 5TH DECEMBER – Its going to be a cracker...

I have booked this. Will be my first opertunity to test and setup the car after all the repairs and upgrades. This would be a great opertunity for you to get your car on track under safe and controlled conditions. A very relaxed, friendly bunch that take part and have a great time. Go on...

Need the twin banjo water feed pipe toot sweet. I have not been able to get in touch with Ben at Hose Solu' but on their wabsite, they only sell them as a pair and did not fit the other braided water hose last time as it seemed pointless... the OE pipe is fine on the front of turbo. Managed to...

I have fitted my Greddy Ultimate and almost ready to get my R mapped. Off the top of my head I can think of three tunners. Extreme Motorsports Wallace Performance GI Motorsport Kilmarnock Nick Jones - Tunning Developments Has anabody used the above for mapping or recommend a tunner. I'll...

OSF wing wheel arch trim wanted. Must have fixing bolts in tacted and if possible un painted. Cheers!

Fitted new turbo 2871r and my boost gauge is reading -18psi at idle. Car is not on the road yet so I can't really check what +ve boost is on throttle under load but -18psi on idle seems like a high reading. :shock:

Maybe I have posted this in the wrong section but I could not find the downgrade section.... ;-) I have replaced my OE turbo with a GT2871r and ARC tmic... I am wondering if it would be detramental to use the OE IC to turbo pipe to marry this up... my plan would be to cut the turbo end of the...

I think I have knackered my Autometer manual Oil Temp gauge (5741) while fitting. This item was purchased while I was working in USA a year ago along with other autometer gauges and is not a return item. Having followed the “Caution Label” and making sure I did not micro bend or strain the...

Had this tucked away in my box of goodies... Bought it over two years ago as a Z32 and wanted to check if it is what I thought... it's 80mm both ends. Cheers!

From their website. Stop Press - CAR TRACK AFTERNOON THIS SUNDAY<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p> <o:p></o:p> This Sunday from 1.20pm - 5pm we are running a Car Track Afternoon for all cars with tax and M.O.T. There will be 3 x 20...

I'm re-designing my oil cooling circuit as I want to fit remote filter head and gain oil temp port and plan to fit the following: Mocal sandwich plate with cover plate to mocal remote filter head (with oil temp port) to front mounted 16 row oil cooler. I will had to do away with the...

Time Attack & Powerslide LIVE: European Drifting Championship Sun May 18th 11am - 5pm http://www.timeattack.co.uk/next%20event.html http://www.knockhill.com/events/event.php I'll be going along to this.... anybody else planning on going? Just to wet your whistle.... Mad Japs drifting and...

I know it does not take much but I'm confused....:? When I look on the time attack web site it says Knockhill 18th May 2008. http://www.timeattack.co.uk/next%20event.html But when I look on the Knockhill web site, European Drifting Championship Sun May 18th...

Greetings! <TABLE cellSpacing=0 cellPadding=0 width=600 border=0><TBODY><TR vAlign=baseline align=left bgColor=#999999><TD vAlign=bottom noWrap width=600 background=http://www.knockhill.com/CMS/uploads/Image/Email/Speed_Sunday/Apr08/header.jpg height=97>Driving...