Search results

Not myself, although I have driven a 500 HP Pulsar before. I owned a stroked WRX for 3 years, so I'm not talking out of the blue here. I agree with you, and that's what I said in the beginning: a stroker is fine for a weekend toy; but you need to make sure that the other parts match...

Didn't mean to step on anyone's toes here, just tried to keep it simple: an engine with a longer stroke works better at lower RPM as opposed to an engine with a shorter stroke. A longer stroke engine has a less broad power-band (effective range) compared a short stroke engine. Consequence of...

It all depends on setup and HP goal, yes a stroker can be great for the road if setup (cams, manifold, turbo) for that purpose specifically, but most people I see stroking their engines do not stroke it for that purpose. There are so many other (in my opinion better) setups to spend money on in...

If it is a roadcar, the focus should be on drivability and usefull power delivery; not on power. No Pulsar with 500-600 HP is going to make for a nice roadcar no matter how you set it up, you'd probably be outrun under normal roadconditions by guys with a properly set up 400 HP setup. I see a...

Weird, showed up in recent posts somehow. Maybe smth with my cell settings...

If its that bad that you can see it in streetlights: just after driving (warm engine): let it idle for like 2min and take the oil filler cap off with the engine running. If pushes out smoke or sputters oil your engine is to shit. By the way; if you want to truly upgrade the standard oil...

I wrote to Injector Dynamics to ask, their reply: Hi Sven, We can certainly get you taken care of. Don't worry about the colors specifically. What we need is the overall injector length from o-ring to o-ring, and then the top and bottom o-ring diameters. Can you get me that? I am overseas...

I heard the GTI-R has 10.5mm holes in the fuel rail, not 11mm. Did you drill out your standard rail to 11mm, or do you just force the ID1000's in? The site from Injector Dynamics states two versions for the SR20 with 11mm tops: 240SX-S13/S14/S15 (11mm) 1000.13.06.60.11.4 $480.00...

It's been a while, slow build here, no heating in the barn :sad:... Anyway; I'm about to get the ID1000's, but the question is; how do I fit them and what size do I order? Does anyone know of a fuel rail that I can fit that will be a drop in rail with AN fittings on both ends so I can run...

thanks Ed and Mark; 1000cc's it is. Guess I will put the 560cc's in the for sale section soon. BTW: more fuel means also more air, you recon the Z32 MAF will cope with E85, 1000CC and 400HP or do I need to go with a MAP-sensor?

Dear fellow R owners, I am currently building up my fully forged GTI-R with a GTX2867R or GTX2863R, didn't decide yet. Since I live in Germany now, there is basically E85 on every streetcorner here. I want to achieve 375 HP with fast spool on the 63mm or a 410 HP with a little less fast spool...

I would definately be in the market for a replica when we can get something going. Doesn't need to be monkey cheap also, quality and original design should be first priority. Would be cool to hang some nice modern spec PIAA HID's in there. Maybe an all-inn package deal with lights could be an...

Carbon fiber would be nice, but I still would prefer an original one. Since so many pulsar are being torn for parts recently, there must be some of these coming up for sale. Does anyone happen to know the original Nissan part number? Will write an e-mail to Nissan Japan to see if they might have...

I already went through that thread and emailed about everyone who had one for sale (even from posts posted years ago). I found a half-cut on ebay US two weeks ago that had this set installed; 2000 USD for the whole half cut, I made a very decent offer but the guy was unwilling to invest 5...

Been looking for a set of these, I know they are rare, but I figured there might be someone who has a set lying around? any color will do. Looking for the grill and lights...