Search results

wanted new oil pump sorry wrong section

just found this check the link out http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=014&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=330260564799&rd=1

im after my car trailered to nuneaton from leicester to have the exhaust made can anyone do this for a reasonable price.

i need a rear diff breather pipe not the rubber one, the metal bit that comes out the diff casing for the hose to attach to. nissan carnt get for 6 weeks

where can i buy really good quality wheel spacers such as h&r 10mm with longer studs

does anyone no the total length of the rear stabilizer links, the one of the anti roll bar, i took one of my car and measured 150mm, i ordered a new set and was sent ones that measured 185mm and was told that they are the correct ones, was not sure if somebody had put the wrong ones on my car or...

do you think it is just as good as the koyo one as i may buy or should i get the koyo one http://cgi.ebay.co.uk/50mm-alloy-aluminum-radiator-Nissan-N14-GTIR_W0QQitemZ290213644433QQihZ019QQcategoryZ43807QQtcZphotoQQcmdZViewItemQQ_trksidZp1713.m153.l1262

Just thought il let everyone no that ive been in touch with powerflex and they now have my rear subframe and will be making the 4 big main bushes in the subframe, they say it will take them approx 1 week to do, once i recieve it back il check it all fits ok then post some pics up.

Does any one no where i can send my car to have my 3" exhaust altered, need it extending from normal turbo posistion to top mount need a puker job doing, also need my intercooler pipe run custom making with as less hoses as poss prefered manderal bent, needs to be as close to the midlands as...

i carnt remove the bolt that holds the rear stabilizer bar (radious bolt) to the rear subframe, i have undone the nut on the back of the bolt the bolt seems to be stuck in the bush and wont come out ived tryed hitting it and heating it up with no joy.

I have a hks s/s racing wastegate, there are 2 nipples on them one on top the other on the side, were do these to vacum pipes goto.

I have Hks 264 cams and hks vernier pulleys and i need someone who knows what there doing to come and set my verniers up before the engine goes in preferbly this week im in leicester thanks

any advantages or disadvantages from using a chargecooler over a front mount intercooler

oil jet needed asap as im building my engine prefered leicestershire area

where can i get a oil cooler kit which will cope with aprrox 450-500 bhp

Good bare block good bare block wanted close to leicester prefered

i need to no the pitch of the thread and size for the sensor of a egt gauge, so i can drill and tapp the hole ready for when i buy one as my turbo already has the hole in and want to sort it before i bolt the turbo on, the hole is approx m8 so need to no weather it ts m8 x 1.0 / m8 x 1.25 etc thanks

having problems getting one to fit, i have had 3 different makes including blueprint and none of them fit they are approx 1mm to big, i have asked for standard nissan sunny ones and gtir ones with no joy anyone help

i need the front wishbone bush, the complete small ball joint with uprated bushes that bolts to the anti roll bar to the center of the wishbone, and the anti roll bar bushes. where can i buy all these uprated, part codes would be a grate help.

i need approx 2x 90deg elbows and 1 length of exhaust pipe all 3" to make up my new down pipe to join the rest of my 3" system who sells this