Search results

Hi guys, Mate is looking to upgrade some parts and just wondering does anyone know if the following will fit relatively easy? Car is 180SX. - Turbo? - Front Brakes - note he has a 4 stud hub also. - injectors? I know ours are top fed low impedence... - clutch? I doubt these are same...

:doh: Ok, uprated Radiator and thermostat been on agenda for a little but not done. Driving home on friday car temp suddenly shoots up. look at commander and see temps of hi 90's... pull in and let cool down. water had boiled out the expansion bottle. Suspect sticking thermostat or...

Hi guys, PROBLEM SOLVED Posting this up as did a search and had no joy, have now learned and putting up for anyone for future. Basically, I hit the rev limiter twice, after which car kinda stuttered on idle and cut out. Restarted fine but ran rough and cut out. Symptoms: - Hit Rev...

Hi guys, having a bit of a nitemare trying to get replacement pads for the car. I can order from Rally Design but trying to get them sooner. Local shops need outline of pad to see what else will fit. I'm running th Wilwood 4 Pot Midilite Calipers. Want to get Mintex 1144's but told...

Well after much Cash, time and effort my petal finally started rewarding me with the engine running perfect and producing around abouts 357bhp and 368 lb/ft torque. Yes torque seems high, bhp seems maybe slightly low, who knows, who cares it goes well anyway for a 15 yr old bin. Running a...

Well lads, April 7th and 8th - Doncaster Show combined with Time Attack 1 and Drifting. Couple of us may be flying over to watch this for the weekend. Anyone on here going to it? Rishi - when are you gonna enter one of these so we can see an R with huge power go up against the best...

Well, Just wondering does anyone know fi conrods are sold seperately by our friends at Nissan or as a set? Ballpark price?

Well, as title says boy am I having fun this last 12 months! Recent problem of dying on motorway, oil pressure fine no warning lights etc... Wouldn't start but cranked fine... So replaced Distributor and it started first time..... only to be greeted with knocking knocking from what...

Distributor wanted as this seems to be the problem with mine not getting any spark... Anybody.....

just in from evening of fun.. cruising off boost at 80mph on way home and sudden conk out.... pull in and check boost pipes etc, nothing appears wrong. try to start and it turns and tries to spark but can't.... don't think i can hear fuel pump buzz so hope it that.. its a walbro, or was...

Hi guys, I've read the posts on ignition blaster coils, uprating etc from the likes of Steve and Jim I think. Just wondering what power has been seen on standard ignition, and who else has had problems? Strange as pearl476.5bhp has no problems on his standard set up and grade 9 plugs...

hi guys, so after pig of day fitting 3071 and modifying oil,water actuator, brackets etc its finally on. trouble is its not boosting.. drives lik 2litre and does rev out. i suspect the actuator is problem in that it was fitted, on close inspection , wit internal wastegate as open...

Hi guys, Firstly, Paz, stop laughing at that word!! :-) Secondly, am I correct in saying teh T25 fitment with 5 bolt exit is the correct one as per pic? For standard downpipe fitment etc. I know we run a T28 but is this teh same? If its diff can anyone post pics? can't access...

Hi guys, Car recently rebuilt, and guys bypassed the aVC-r as they said it was boosting too much and blowing off intercooler pipes lik crazy... So they ran one pipe from the inlet to the actuator. Fine so far, now when I go to changet this, run my pipe form actuator to avc-r, and then...

Hi guys, I know Simmo had one of these trialled for an evening but without a proper map. I also know he was going for one of these before he upped and sold up. Jobi had thoughts I think but went with a 3071. I would like to know opinions and experience on thsi turbo with the GTI-R if...

Hey guys, I'm looking into the idea of getting an Apexi exhaust valve controller, been in court and got enough warnings before car was off road. back on now and couldn't get any baffles to fit so seems this the best option anyway. Has anyone got one of these fitted? It says to mount near...

Hi guys, Here is my turbo timer http://www.2kracing.com/product_info.php/cPath/476_500/products_id/3627?osCsid=b2fefef637b7d10846d1bd3002e500fe It was on the car when I bought it and worked fine for a year - settings of auto, 30sec, 1 min, 3 min etc ... Now, R went in for rebuild...

hey guys, For browsing engine bay pics, there are a fair few that have a pipe or sensor that runs from the exhaust manifold to the inlet manifold/throttle it appears. Is this an extra sensor or something that is fitted extra? Or has it been removed form other engine bays ?? Its on the...

Hi guys, About to get an oil cooler kit at last and I'd prefer to mount it on top of the injector rail as done in some cases. Just wondering does heat soak become an issue here or what are your experiences? I guess only reason for mounting it on top is for looks and to keep engine bay...

Howdi All... For those that have had rebuilds... The question is what is the minimum miles for running in, or more lilely the minimum miles at correct acceleration. My R is finally returning this week on Fri all going well... Trouble is, I've rolling road day on Sat! Tight or what...