Search results
-
M
Approx 800cc Injectors
DeatschWerks Fuel Injectors (Flow Rated at 830cc @ 3.5 BAR) - -
M
Trafford Centre Meet 15th April 2012 12pm
Hi guys! It's that time again for another trafford meet! Getting interest as the last one was so big...(200+ Jap cars attended the last meet) Last years meet http://www.civiclife.net/board/topic/91977-trafford-centre-meet-20th-march-2011-1pm/page__fromsearch__1...- mov
- Thread
- Replies: 4
- Forum: Other Shows & Events
-
M
Wiring HELP :(
Hi Thanks i know Scott B but tbh honest the price he paid to get his wired was well over £1000. Need it done much much cheaper- mov
- Post #4
- Forum: General GTI-R Discussion
-
M
Wiring HELP :(
hi guys, do you know anyone close to manchester that could make a custom loom or modify an almera GTi loom to fit into my micra? the old loom was not done properly and we wanted to have it right this time round. it in 1995 Micra (no electric mirrors, windows, sunroof) and the engine is from a...- mov
- Thread
- Replies: 5
- Forum: General GTI-R Discussion
-
M
Adjustable Fuel pressure regulator
as above cheaps as possible pm me or text me 07912035348- mov
- Thread
- Replies: 0
- Forum: GTi-R Parts Wanted
-
M
How to set your TPS
Cant see the pics on the first page Anyone got the pic so i know which wire is which? -
M
Few problems...
Hi got few problems with the 'R' 1. I have to tick the car over several times before it starts? 2. Idle is normally high above 1rpm and seems to hesitate on full throttle, got a map sensor so maf 3. Best way to check for boost leaks Cheers P.S iv checked the idle problems thread but...- mov
- Thread
- Replies: 3
- Forum: Technical Questions
-
M
Boring
Right, im looking at getting an SR engine bored.. Anyone know anyone whos worked on these engines, in the north west? Want to get it bored to 90mm or 92mm, for which a torque plate will be needed. If not in the north, then anywhere, but they have to have done these engines before? Cheers- mov
- Thread
- Replies: 6
- Forum: Technical Questions