First of all i want to make it clear that im in two minds to sell the car or break it for spares. This is to show people what the car has got, so if someone decides to buy it whole then great, if not then i will most likely start stripping it down towards the end of October.
I apologise in...
I've got some poly steering rack bushes to fit and after a quick look is there an easy way of changing the bushes over?!
The ones ive got currently dont have a cut in them to allow them to be fed over the rack right by the bracket but this can easily be done or should the bush not be cut...
Im looking for a bit of help as im sure that i read on here recently about converting the Air con on/off switch to provide a manual over ride for the cooling fans rather than put in a seperate switch.
I've had a quick search through but cant seem to find the original topic, and furthermore is...
Ive been thinking if there would be any benefit and/or problem with putting a spacer under the front antiroll bar bushes.
I know that you can get the thicker roll bar from whiteline so im guessing that this would be in a similar vain but easier to change if required.
Am i right in...
has anyone got a Turini or an evo 5 bumper for sale?
im also after a set of either 16 or 17" alloy wheels in either black or white if anyones got a set?
im looking at getting a fuel pressure regulator for the new engine and im just seeing what people think about the following options.
1. should i get a kit that has the gauge under the bonnet like...
Japshow finale 7th october, possible stand if members commit!
Are there any plans to organise a stand again for this event, as this show has always seemed to be better than the one in june for some reason!
right i got my new engine at the weekend (thanks gtirtrack:thumbsup:) so im just wondering what i can replace when the old one comes out. ive already fitted the powerflex gearbox mount bush, is it worth doing the others and wheres the best place to get them?
Im also going to be fitting a new...
Further to robs plenum spacer ive been doing some calculations to see if it will be worth looking at having some made up.
The internal circumferance of the plenum (around the gasket) is 89cm which equates to a square of 22.25cm
therefore the surface area would be 22.25 x 22.25 =...
does anyone know what size the bolts are for the front anti roll bar brackets (the ones under the car)?
ive looked on the parts catalogue but no mention of thread size etc
thanks
Well i think the adrenalin has finally left my system, so time to reflect on the days events. Got there (snetterton)in good time and parked up where i could see other jap motors it was all arranged as a virgins event on one of the other forums im on.
Started speaking with one of the bloke who...
recently refitted the coilovers to the car and it now appears that i get a sort of clicky/ droning noise from the osf of the car. The droning could well be the propshaft bearing on its way out as i lost a balance weight a year or two ago but im stumped as to what the clicking type noise it. Ive...
fitted my coilovers again after having a leaky shock replaced and i somehow managed to totally bugger up the thread on one of the top bolts. I have got a spare set of suspension in the shed so should i be able to tap out the damaged one and pull a new one in its place?
ive noticed this afternoon that i had a small puddle of fluid by the offside front wheel which wasnt there a day or two ago, initially i thought that the brakes were playing up but when i removed the wheel i could see that the whole leg of the shock was wet with fluid and appeared to be weeping...
Seeing as there have been a couple of decent rolling road days already held at this location, i was wondering if there were any plans from the mods to arrange another session so we can see who is running what before the seasons events kick off??
Im thinking of going to this just so i can get some track time in before the national meet and would be good to have a few more pulsars on track as well.
Date is Monday 16th April so it wont be to everyones liking i know. If you want more details click on the link below...
hi guys,
looking to get a wideband air/fuel meter so me and my mate can start to learn how to map our cars (he's got a gt4 st205) and were both using the powerFC. is the below a good choice as my mate has heard that you can remove the ecu from the car and play about with the fuelling from...
right ive got bout a grand for the next mod but im torn as to what to do!
option 1 is a custom built fia regulation 6 point rollcage and bucket seats (see group buy for more info) (bout £750 all in)
option 2 is a set of jun 272deg 11mm cams, pulleys, springs and retainers (bout £750 all...
Over the next few months im looking to get my rebuild parts so that im all ready just in case the engine goes pop.
Im already making just shy of 360bhp at 1.2bar and since then ive had a 3" downpipe & screamer pipe fitted and a z32.
Below is a rough list of what i think il need for the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.