People had problems years ago and I think they just shaved part of the gearbox off.
PS You might need longer studs with a 10mm spacer.
Been a while since I checked, but I think 900rpm is about factory idle.
Plugs don't run lean they just ignite the charge. If it's running lean it could be an injector.
Air leak on the inlet system somewhere?
Check every hose you can on the engine intake (including turbo pipe work) for splits and security.
Play back error on the video. :(
You not racing your blue one at the moment then?
Yes, if you have a Gtir (54C) SR20DET and not an inferior version then 7s are standard 8s are one step colder for higher power.
Aren't our plugs heat range 7 as standard going to 8s when tuned if needed? 6 is the 200sx plug isn't it?
Spare wheel bolts in to the right hand side.
Jack stores under the rear slam panel if that's the right name.
Try here http://www.mjpauto.com/
I've ordered a lot of stuff from him over the years, but nothing recently. I think it's Mike.
You spoke too soon. :cry:
To many spammers signing up. Although most of them don't actually spam, but going by the user names they must be.
Guess it depends how much power you're planning on running.
I think there's been at least one. but I've seen very little about it.
Is it coming out of the gearbox breather if it's on the gearbox?
Sent from my ONEPLUS A5000 using Tapatalk
Shame he can't launch it well.
I think the fans come on at 94 or 95ish.
Don't expect it to last long if you fit the GT35R. ;)
I hope you beat that Merc. ;)
I have a feeling the Z32 might be maxed out by the GT35R.
What power are you aiming for? The GT35r is a 550bhp+ capable turbo isn't it? You'll probably need plenty of revs to keep it on song.
Separate names with a comma.