I wasnt that impressed with the ones from Australia, they were not very accurate and imo a waste of money.
Best method is to simply measure the...
Please pm me if you have one?
All sorted now thanks,
Pping me if you hsve any?
[ATTACH] Ive got a spare but some of the rubber has split,
(easily refurbed by filling with tiger seal ir similar)
please pm me if you have one?
Also make sure you put new shift linkage bushes in, this could be a root cause of failure,
Doing a rebuild yourself isnt as daunting as you might think,
As long as you have the right tools (bearing pullers, feeler gauges, seal removers...
Ive some surplus parts from my recent engine and gearbox rebuild for sale,
2x Cam sprockets, £15 each
1x crank sprocket, £6
1x fronf diff bearing...
Yeah, it is,
On all other gearboxes ive worked on the sealsare fitted from the outside, but not on this one.
Totally shit design imo.
If you still need one pm me as i have a spare
Im in Kenilworth if you want to inspect first?
The input shaft seal shouldn't leak at all, especially when static,
Replacing it is a pain because you have to open up the gearbox...
I've stripped my engine down and discovered i spun a main cap bearing, so i only need block, crank and pistons
If you still have these...
Use a standard spanner but then a screw driver between the manifold to lever it down,
Or 2 spanners connected,
How come its off the road Ricks?
Hi Gaz, vin is rnn14-100230
Are gtir injectors hard to remove? In a mechanics mag i read about injectors sometimes needing to be chiselled out
Just one more turn should do it...... Bugger!
Separate names with a comma.