full 3" custom system

windsoR · 08-02-2010, 18:24

3" custom system including elbow and front pipe straight through to back box 5" slash tail.made by prospeed exhausts of cardiff.a quallity system .check them out at ( www.pro-speedexhausts.com.)will send pics by email if required.

Smo · 08-02-2010, 18:36

Very interested mate, can you email them to samcorser@gmail.com please.

windsoR · 08-02-2010, 19:25

pics sent mate

Smo · 08-02-2010, 20:29

Thanks for that - I've emailed you back.

pulsar350R · 08-02-2010, 21:01

hi mate can you send pictures to ali786kk@yahoo.ie

very interested, how much you for it??? can collect

windsoR · 09-02-2010, 20:11

now sold to smo

08-02-2010, 18:24	#1
windsoR 1st Gear Join Date: Nov 2007 Posts: 171	full 3" custom system 3" custom system including elbow and front pipe straight through to back box 5" slash tail.made by prospeed exhausts of cardiff.a quallity system .check them out at ( www.pro-speedexhausts.com.)will send pics by email if required.

08-02-2010, 18:36	#2
Smo Isle of Wight Region Rep Join Date: Aug 2006 Location: Isle of Wight Posts: 1,274	Very interested mate, can you email them to samcorser@gmail.com please. __________________ 53bhp Corsa ⇒ 160bhp Pug XD (GTi) ⇒ 250bhp GTi-R ⇒ 360bhp Fully Forged GTi-R ⇒ 300bhp Evo V GSR ⇒ 450bhp Single Turbo RX-7 ⇒ 300bhp Forged GTi-R ⇒ 400bhp 2.2 GTi-R (Current) Japspeed Ph. 2 Manifold, GT3076R-EWG (Tial 44mm) ,Fully Forged Tomei SR22DET (Tomei Crank, Rods, 87mm Pistons, Cams & Stoppers), ACL Main Thrust & Big Ends, Oversized Valves & 3-Way Seats, Tomei Flywheel, Uprated Selector, Bosch 044 & Walbro 255, AP Twin Paddle, Z32 MAF, 1000cc Injectors, Forge FMIC.

08-02-2010, 20:29	#4
Smo Isle of Wight Region Rep Join Date: Aug 2006 Location: Isle of Wight Posts: 1,274	Thanks for that - I've emailed you back. __________________ 53bhp Corsa ⇒ 160bhp Pug XD (GTi) ⇒ 250bhp GTi-R ⇒ 360bhp Fully Forged GTi-R ⇒ 300bhp Evo V GSR ⇒ 450bhp Single Turbo RX-7 ⇒ 300bhp Forged GTi-R ⇒ 400bhp 2.2 GTi-R (Current) Japspeed Ph. 2 Manifold, GT3076R-EWG (Tial 44mm) ,Fully Forged Tomei SR22DET (Tomei Crank, Rods, 87mm Pistons, Cams & Stoppers), ACL Main Thrust & Big Ends, Oversized Valves & 3-Way Seats, Tomei Flywheel, Uprated Selector, Bosch 044 & Walbro 255, AP Twin Paddle, Z32 MAF, 1000cc Injectors, Forge FMIC.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-02-2010, 19:25	#3
windsoR 1st Gear Join Date: Nov 2007 Posts: 171	pics sent mate

08-02-2010, 21:01	#5
pulsar350R 2nd Gear Join Date: Nov 2006 Location: North Wales Posts: 364	hi mate can you send pictures to ali786kk@yahoo.ie very interested, how much you for it??? can collect

09-02-2010, 20:11	#6
windsoR 1st Gear Join Date: Nov 2007 Posts: 171	now sold to smo